Collinite 845 Liquid Wax

Liquid Wax

The combo is to put Jescar Power Lock Plus as the base layer (polymer sealant) and top that with 2 coats of 845. This looks better than anything else I’ve ever used outside of maybe Swissvax Concorso, but lasts a lot longer and is more durable. If you’re not wanting to jump into coatings, Power Lock Plus and Collinte 845 is your most legit option.

A couple of things to note:

• One bottle of this should last you the next ten years of your life. I think I’ve spilled more on the floor than I’ve actually used on my cars.
• It will change state depending on the temperature it is stored. That is normal and fine to use. Run the bottle under warm water if you need to soften it up.

Here is how I use it:

1. Apply after letting the previous layer of JescarPower Lock Plus cure for 3 hours.
2. Apply thin layer to the entire vehicle using Adam’s Hex Foam Applicator. The thinner the better.
3. By the time you’ve finished applying, it will be ready to wipe off. I use the Wax & Sealant Removal Towelin the OG store to wipe off.
4. You could use something like McKee’s 37 N-914dilutedin a spray bottle as lubrication to aid in wiping.
5. Let cure overnight. I like to give it about 12 hours, but that may be more placebo than anything.
6. Apply another coat using the same process.
7. There is one drawback to the product. You will get a haze that shows up a few days later. Resist the temptation to wipe it off and scratch all of your hard work. Wait until you can perform a full wash. It won’t hurt anything even if you take a few days to wash it. You are simply seeing theoils coming to the surface. The haze will generally not come back after that.
8. Maintain usingOG Drying Aidas your drying aid.
9. I usually get 6-9 months of protection from it. Assuming you don’t have tons of con